Fastlife70s (November 30, 1999 at 12:00 am)

Awsome video, very helpfull. Well explained. Very graphic.

Fastlife70s (November 30, 1999 at 12:00 am)

Thats a good idea for a cost efficent project. Vaccum infucion is for more precise reinforcement to resin ratios, when strnght and lightweight are needed.

JamestownTV (November 30, 1999 at 12:00 am)

s you can thin Polyester resin with acetone. At Ocean Scout we actually cut it about 50/50 and paint it onto all of the plywood. It cures to a light surface tack which really bonds well with gelcoat . I also prefer thinning my gelcoat with acetone when I spray it. It evaporates faster than anything else. I've read that you can use a Styrene Monomer. I'm not sure about the facts though. I would recommend that he contacts the manufacture of the resin to be on the safe side.

JamestownTV (November 30, 1999 at 12:00 am)

You can also call us at 1-800-423-0030. If you explain your project to our customer service reps they should be able to help you.Thanks for the great question and best of luck with your project.

Coughtry (November 30, 1999 at 12:00 am)

My resin is too thick. Can I use Styrene thinner in my polyester resin in the same mannor when you spray resin for vacuum infusion. Right now I can only reach half way accrost the mold after chilling my resin in the frig and working at 3am when cool out. I've come a long way, but still missing some peaces to the puzzle. If I use less then half the recommended hardner it takes 1-1/2 weeks to cure. Please help with info. Thanks (Polyester resin is a must)

gerardrondeau (November 30, 1999 at 12:00 am)

belle vidéo de moulage sous vide.

drewthedrew (November 30, 1999 at 12:00 am)

airtech is screwed. they got busted by the military for bribery and fraud. go google it.

JamestownTV (November 30, 1999 at 12:00 am)

This video is from Airtech and it's purpose demonstrates how to use their products.

Rabbit01vw (November 30, 1999 at 12:00 am)

i could make a wet-lay mold faster and more cost efficent way than that, all you have to do is add dry cloth between the wet cloth to soak up extra resin. Peel ply is always a great idea

vacformcomposites (November 30, 1999 at 12:00 am)

there is an excellent company in the uk supplying everything for resin infusion , vacform composites. give simon a call he knows evrything ,very reasonable prices compared to the other guys